Working fundamental: Flywheel tooth cut the sensor magnetic line of force will bring a pulse
signal, take count of the pulse signal and divide it with flywheel tooth then get the rotate speed.
Technical parameters:
Dimension:87×30mm、
Weight：120g
Install Screw Thread：M18X1.5，(Deep) 60mm.
Engine Idle output voltage virtual value: U≥1V
Engine max rotate speed output voltage virtual value: U≤16V
Output resistance value:1050±100Ω
According with auto instrument quality general criterion : EQC-170-91
The distance of Sensor T port to induced gear surface : 1+0.20 mm
Usage: Install along the flywheel radial, screw down the sensor until it touch the tooth surface, then
reverse 1/4 screw thread.