Minco 430/440 genset controller adopts special module , high performance microprocessor and industry components. Wide–screen LCD display, mutually operated with Chinese and English double language menu. All the input and output ports support user-defined function, actually meets different types of genset and other auto control requirements. Minco430/440 has special timing start function, which adapt to start genset at regular time of each month, each week or each day. Perfect auto start , auto protection and ATS control function, optional with RS232 communication port.
Minco 430/440 is a type of high cost performance and multipurpose intelligent controller, widely used to air-cooled or mini diesel genset automatization complete set.

I. Function and Charateristics
1.Display with three phases of voltage, current and frequency. Real virtual value measuring for voltage and current, powerful function ，action smartly；
2.Small and exquisite shape, wide-screen LCD display with 128×64 lattice and black-light；
3.Chinese and English double language menu, mutual operation, can be set and operated without the computer；
4.Auto start, auto protection, ATS control function；
5.Perfect auto protection, warning details and working statement character display directly, fault record more than 50 items；
6.Connected parameters of coolant temp., oil pressure, fuel level etc, is abundant；
7.All relay contact capability of start and fuel is above 10A/250VAC/30VDC，the other is 5A；
8.User-defined to the input and output port, timing start or stop function；
9.RS232 communication. This is optional function, which attached “four remote control” monitor software.

II. Control parameter list:
1.Analog inputs (9 items)
Single/three phase voltage、load single/three phase current、frequency、power、machine temp.(coolant temp).、oil pressure、fuel level、battery voltage、charge voltage , mains three phase voltage/frequency (440) etc.；
2.Switch inputs (6 items)
Remote start、emergency stop、user-defined input1-4（Optional：monitor，low oil pressure；high coolant temperature；acceleration limit；deceleration limit；high oil temperature；low fuel level（alarm non-stop）；high fuel level； float charge fail alarm；alarm；alarm non-stop（running state）；alarm stop etc.12 items）etc；
3. Relay outputs (7 items of which 4 programmable items, 18 options for each item )
Fuel、start、power、user-defined1-4 （0-common failure；1-auxiliary stop；2-genset supply；3-automation；4-closed on idle；5-off on idle；6- pre-fuel；7-warm up；8-acceleration；9-deceleration；10-over speed; 11-over load; 12-high speed; 13- low battery voltage; 14-Pumping ; 15- alarm; 16-over heat; 17-mains; etc.
4.Delay setting (22 items)
Delay of cool down；delay of pre-fuel；delay of genset start；delay of idle start；delay of crank interval；delay of idle stop；crank time；acceleration delay；bypass time；delay of auxiliary input 1；delay of energize to stop(ETS)；delay of auxiliary input 2； delay of auxiliary input 3；overload delay；delay of auxiliary input 4；over voltage delay；delay of charge failure；delay of over frequency；delay of low battery；delay of warm up；delay of transform；deceleration delay；
5.System parameters settings (17 items):
Trip frequency；output setting(4 items)；start method；current ratio； display mode；password setting；input setting(4 items)；language choose；address； back light choose； speed measuring method; gear tooth No; voltage measuring method; mains failure start method..
III. External Features
1. Size of outside：front panel(L×WxD) 96x96x59mm
Back shell(LxWxD) 84x84x50 mm
2. Hole size of installation (L×W) 85x85mm
3. Power supply：DC8-40 V，<300 mA ；
4. Work environment：-25~75℃，relative humidity：<95%
5. N.G: 400 g