Minco 810B/820B genset controller adopts special mould, high strength ABS panel, PMMA transparent window and metal back shell. The inside of the controller uses high performance microprocessor ,large screen backlight character LCD display, Chinese and English menu.The controller has auto start, auto protection, four remote control and auto transfer switch control function. Minco 820B not only can provide comprehensive setting and control genset functions as 810B,but also can monitor mains supply, which realize complete automatization management of the mains supply and genset power supply. The controller has multi-function,clear display,easy operation and good appearance features.

I. Functional Characteristics
1.Dual processing chip, real virtual value measurement,agile reaction
2.Mains supply and genset power supply management, ATS control
3.Large screen backlight character LCD display
4.Chinese and English menu, interactive operation. Can be set and operated without computer.
5.Auto start, auto protection
6.Perfect auto protection, direct character display alarm details and working state, more than 50 fault records.
7.Large numbers of connected parameters: double coolant temp., double oil pressure, fuel level and oil temp. etc.
8.All the relays contact capacity is over 10A/250VAC/30VDC.
9.Electronic speed governing and mechanical speed regulation (controlling DC motor directly are compatible. Many user-defined settings: timing start or stop etc.
10.RS232 communication, attached “four-remote control” monitoring software
11.Unique rubber bearing design with waterproof, dustproof and shock absorption features

II.Control Parameters
1. Analog inputs (20 items):
Three-phase mains supply voltage, frequency, three-phase generator
voltage, three-phase load current, coolant temperature 1, coolant
temperature 2, oil pressure 1, oil pressure 2, oil temperature, fuel
level, battery voltage, generator frequency, speed, monitoring
input etc.
2. Switch inputs (9 items):
Remote reset, remote start, emergency stop, high coolant
temperature, low oil pressure , high oil temperature, low fuel level,
Acc/Dec limit etc.
3. Relay outputs (8 items) :
Genset supply, mains supply, fuel, start, idle speed normal open
(Dec), idle speed normal close(Acc),pre-fuel (pre-heating), fault etc.
4. Delay settings (23 items):
Remote start ,cranking , cycle crank space, cooling stop, start bypass, retransfer ,warm-up, no supply to load, transform fault, ETS fuel ,speed monitoring，over speed monitoring, idle speed (Acc), idle speed(Dec), alarm stop of excessively high water temperature, excessively low oil pressure stop, monitoring input alarm, stop, excessively low battery voltage alarm, genset voltage over limit stop, genset frequency over limit stop, pre-fuel/pre-heating ,overload stop etc.
5. System parameters settings (21 items):
Start times, fuel mode, oil pressure sensor kind, coolant temperature sensor kind, monitoring sensor kind, communication address, low battery voltage reaction, monitoring input reaction, delivery default, indicator light test, CT rate, speed sensor kind, flywheel tooth; coolant temperature adjustment value, oil pressure adjustment value, monitoring input adjustment value, phase / line voltage, display transform selecting, language selecting, backlight control etc.

III. External Features
1. Dimension: Front panel : (W×H×D） 213×153 x8mm
Back panel: (W×H×D）197×137×52 mm
Mounting hole：(W×H）198×138 mm
2. Net weight : 880 g
3. Power Supply : DC8-36 V，power consumption current <300 mA
4. Working environment: -25~70℃, relative humidity <95%